Color sensing digital fiber amplifier unit (17 pages)
Summary of Contents for Omron E3X-NA - DATASHEET 2
Page 1
E3X-DA-N, allows connec- to understand at a glance. The E3X-NA uses the LED bars to tion of up to 16 units. display the light level, ensuring the light level change at a glance.
Page 2
Optical Communications to Prevent Mutual power lines Interference Example for 5 Amplifiers E3X-NA Series Optical communication between amplifiers prevents mutual interference. Up to 5 fiber heads can be installed closely, ex- Example for 5 Amplifiers E3X-NA series cept E3X-NA#F. No relay connectors required.
E3X-NA8 Slave E3X-CN12 ON/OFF output Water-resistant models XS3F-M421-40#-A E3X-NA14V E3X-NA44V (M8 Connector) XS3F-M422-40#-A Amplifier Units Connectors (Order Separately) Note: Stickers for Connectors are included as accessories. Item Shape Cable length No. of conductors Model Master connector E3X-CN11 Slave connector E3X-CN12...
Page 4
Ambient illuminance Incandescent lamp: 10,000 lux max. Sunlight: 20,000 lux max. Operating: Groups of 1 to 3 Amplifiers: -25 to +55°C, Groups of 4 to 11 Amplifiers: -25 to +50°C, Groups of 12 to Ambient temperature 16 Amplifiers: -25 to +45°C Storage: -30 to +70°C (with no icing and condensation)
Page 5
Rated current 2.5 A Rated voltage 50 V 20 m max. (20 mVDC max., 100 mA max.) [By connection with amplifier unit and connection with adjacent con- Contact resistance nector (except conductor resistance of cable)] No. of insertions 50 times (By connection with amplifier unit and connection with adjacent connector)
Class Application jacket color pin No. Brown White Power Brown Blue supply (+V) Black White For DC Power XS3F-M421-402-A XS3F-M422-402-A Blue XS3F-M421-405-A XS3F-M422-405-A supply (0 V) Black Output Note: Pin 2 is not used. A-446 Advanced Photoelectric Sensors...
Sensitivity Indicator 8-turn sensitivity adjuster Communications Hole The window provided in the side face of the unit is a commu- nication window for prevention of mutual interference when it Operation Mode Selector is connected with the other unit. Note that the optional Mobile Use to switch between Light ON and Dark ON modes.
Page 8
3. Apply the supplied seal to the non-connection surface of the The sensor bottom is also equipped with the clip removing master/slave connector. mechanism. 1. Insert the clip to be removed into the slit underneath the clip on another Amplifier Unit. Sticker Sticker Note: Apply the seal to the grooved side.
N o t e : * 1 . T h e m o u n t i n g b r a c k e t c a n a l s o b e u s e d o n s i d e A .
Page 10
With Mounting Blanket Attached Water-resistant Models 28.65 N o t e : * 1 . T h e m o u n t i n g b r a c k e t 25.95 E3X-NA14V c a n a l s o b e u s e d o n s i d e A .
Page 12
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. E23E-EN-01 In the interest of product improvement, specifications are subject to change without notice. A-452 Advanced Photoelectric Sensors...