Stations - Loewe Connect ID 46 DR+ User Manual

Connect ID 40-55 DR+
User guide
System settings
Sound / Stations
Explanations of the sound settings (continued):
more ...
Loudspeaker/ For analogue stations:
Headphone Selection options for Mono/ Stereo or Sound 1 or
sound Sound 2 for bilingual programmes, separately for
the loudspeakers and the headphones.
For DVB channels:
You can choose here if you wish to listen to a special
soundtrack for the visually impaired over the speak-
ers. This soundtrack uses an audio commentary to
describe the action taking place on-screen.
The menu item only appears if an audio commen-
tary is offered by the current channel.
Auto volume The volume may vary when receiving stations with
different standards, when switching from station to
station or during commercials.
You can reduce these differences in volume by
selecting auto volume on. For music and live broad-
casts you get a better sound spectrum with auto
volume off.
AV You can indicate here which sound is output via the
output signal AV socket for dual sound programmes: Sound 1 (e.g.
main language), sound 2 (e.g. foreign language), or
sound 1+2 (both simultaneously).
Maximum You can limit the volume adjustment of the loud-
volume speakers. This prevents selecting a volume which
is too loud.
Maximum Set the sound level to be heard after switching on the
switch on TV set with the mains switch or after a power failure.
volume When switching on the TV set in standby mode, the
volume last used is retained unless it was above this
switch-on level. Otherwise it is limited by this.
Balance Set stereo balance so that the volume impression is
identical on the left and right.
Auto speech If the automatic speech detection is activated,
detection the sound of the current programme is automati-
cally output with optimum comprehensibility when
speech is detected.
88

Stations

Under the item Stations you find all settings concerned with station
search for TV and DVB radio as well as functions for creating and
editing the various station lists.
Station management is not possible as long as a programmed timer
recording is active.
If at least one station is locked, the access code must be entered
.
prior to automatic search
The procedure for radio stations or Station lists Radio is similar to
that for TV stations or Station lists TV. Therefore, this procedure is
described only for TV stations.
Call Stations menu
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Stations,
go to next column.
Stations
Manual scan
Radio (incl.
Station lists
TV
Station lists
Radio
Update
Select desired function,
proceed to next column.
Explanations of setting possibilities in the Stations menu:
Automatic Here you start the wizard that searches and stores
scan all TV and DVB radio stations.
TV+Radio
Manual scan Here, you can enter all the settings available for a
TV TV station.
Manual scan Here, you can enter all the settings available for a
Radio DVB radio station.
Station lists Here you can move and delete TV stations in all
TV lists. You can put together your most frequently
watched programmes in one or more lists of per-
sonal favourites.
Station lists Here you can move and delete DVB radio stations in
Radio all lists. You can put together your most frequently
watched programmes in one or more lists of perso-
nal favourites.
Update If the channel list is not up to date, it will be updated
station list automatically, provided the parameter Allow is
automatically selected.
In this mode you open a wizard which automatically
searches and saves all the TV and radio stations. Please
follow the instructions in the dialogues below.