Loewe Connect ID 46 DR+ User Manual page 24

Hide thumbs Also See for Connect ID 46 DR+:
Table of Contents

Advertisement

Connect ID 40-55 DR+
User guide
Initial installation
Setting options for DVB-S reception:
If you have not selected DVB-S antenna in the list of available anten-
nas: Proceed to Setting options for all types of reception.
Network
selection
Network selection
Please state from which network you wish to receive your station.
Note: The newly selected parameter must be confirmed with the
ASTRA LCN
Standard
Back with
Select network.
If several networks are available via DVB-S, you can
decide which network you want to receive your
channels from.
Proceed to next step.
Select
satellite
Select satellite installation
installation
Please define which satellites you receive or which satellite equipment you use.
Single satellite
2 satellites on 22 kHz switchbox
2 satellites on toneburst switch
Max. 4 satellites on DiSEqC multiswitch
DiSEqC one cable communal system
Other communal installation
Indietro con
Selecting the satellite system.
Specify how you receive which satellite(s) (single
satellite or type of satellite system). Ask your
dealer in this regard.
The normal DVB-S settings are derived from the
selection of the location and do not need to be
changed in most cases.
24
button.
OK
Proceed with
Avanti con
Single
Reception of a single satellite via a connected LNC
satellite
(LNB).
2 satellites
Reception of two different satellites with two LNCs
on 22 kHz
(LNBs) which are connected to the TV set by a 22
switchbox
kHz switchbox.
2 satellites
Reception of two different satellites with two LNCs
on toneburst
(LNBs) which are connected to the TV set by a
switch
toneburst switch.
Max. 4
The TV set controls a DiSEqC multiswitch to which
satellites
up to four LNCs (LNBs) for different satellites are
on DiSEqC
connected.
multiswitch
DiSEqC
Select setting if the TV set is connected to a DiSEqC
one cable
single-cable system (according to EN 50494). Several
Sat receivers can be connected to one Sat cable.
communal
system
other
Select setting if the TV set is connected to a single-
communal
cable system (without DiSEqC). Several Sat recei-
installation
vers can be connected to one Sat cable. Contrary
to a DiSEqC one cable communal system there are
restrictions in the range of certain reception frequen-
cies in "common" single-cable community systems.
Proceed to next step (to the appropriate page of
the satellite system).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Connect id 40 dr+Connect id 55 dr+

Table of Contents