Loewe Connect ID 46 DR+ User Manual page 85

Connect ID 40-55 DR+
User guide
System settings
Picture
3D function
You can use the 3D functionality of your TV set to display 3D material
transmitted by a channel or from an external player that is connected.
You require a pair of Loewe Active Glasses 3D to be able to use the
3D functionality in its entirety (see chapter Accessories). Please read
the operating instructions included with the 3D glasses.
3D settings
Using the 3D settings you can select the correct display format,
should this not have been detected automatically. What's more, you
can choose to view 3D material in 2D or "traditional" 2D material in 3D.
For 3D content that is being played back from an external HDMI player,
the 3D display format is normally recognised correctly when the fac-
tory setting 3D mode Automatic is selected. You may need to set
the 3D mode manually to view 3D content from broadcasters.
Owing to a reduction in the luminance in 3D mode for technical
reasons, Auto-dimming - Room and Auto-Dimming - Video (VBD+)
are deactivated when 3D contents is displayed.
If the TV set is operated with the remote control during a 3D play-
back, flicker effects can occur in the 3D glasses when doing this.
Calling 3D settings
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Picture,
go to next column.
Mark 3D,
go to next column.
3D
... 3D
3D->2D 3D->2D
2D->3D 2D->3D
3D mode 3D mode
With this you can select the correct display format, should this not be recognised automatically, or you can deactivate
the 3D mode.
Select settings,
OK adopt.
Back
off on
off on
Automatic side by side top/bottom
Explanations of the 3D settings:
3D->2D
off/on If you set 3D->2D to on, the 3D material from TV sta-
tions as well as from external players will be changed
into 2D and played back. The three dimensional (3D)
effect will disappear. You will not need to wear the 3D
glasses to view it properly.
2D->3D
off/on If you set 2D->3D to on, all 2D image material will be
displayed in 3D. You will need to wear the 3D glasses
to view it properly.
3D mode
Automatic If the TV is set to this setting (factory setting), then
the TV set automatically switches over to the correct
3D mode, if this is possible and supported by the
broadcaster.
Only change the setting if the 3D content is not dis-
played correctly.
side by side To display 3D content in side by side format. When
viewing 3D content with this setting, two almost
identical images are displayed next to each other
and put together correctly by the TV set.
The 3D mode is Automatic reset the next time you
switch on the TV set.
top/bottom To display 3D content in top/bottom format. When
viewing 3D content with this option, two almost iden-
tical images are displayed one above the other and
put together correctly by the TV set.
The 3D mode is Automatic reset the next time you
switch on the TV set.
85