Loewe Connect ID 46 DR+ User Manual page 91

Connect ID 40-55 DR+
User guide
System settings
Stations
Manual search for cable analogue (analogue cable reception):
Manual search is called.
Cable analogue has been selected as signal source.
Manual TV scan (incl. antenna status)
...
Signal source Signal source
TV standard TV standard
Colour standard Colour standard
Channel Channel
Frequency Frequency
Name Name
C/N C/N
Level Level
Search
Here, you can enter all the settings available for a station. However, this requires detailed knowledge.
Mark and adjust settings,
OK confirm as the case may be.
Mark Search,
OK start search.
If a station has been found:
Mark Store/Overwrite,
OK store station.
Explanations on the search settings for cable analogue:
Signal source Selection of range in which you want to search for the
station.
TV standard If necessary, ask your dealer which standard to se-
lect for specific channels or AV equipment.
Colour If necessary, ask your dealer which standard to se-
standard lect for specific channels or AV equipment.
Channel Direct input of channel.
Frequency Direct input of station frequency.
Range for entry: 044.75 MHz - 859.25 MHz.
Name Here, the name of the found station is displayed. You
can change the name of the station.
Back
Cable analog Cable analog DVB-T DVB-T DVB-C DVB-C DVB-S DVB-S
B/G B/G I I L L D/K D/K M M
PAL PAL SECAM SECAM
E 01 E 01 S 01 S 01
044.00 MHz 044.00 MHz
40.5 dB 40.5 dB
54 dBμV 54 dBμV
Manual DVB-T/C/S search:
Manual search is called.
Manual TV scan (incl. antenna status)
...
Signal source
Frequency
QAM modualtion
Symbol rate
Netzwork
Station name
C/N
Level
BER
Search
Here, you can enter all the settings available for a station. However, this requires detailed knowledge.
Mark and adjust settings,
OK confirm as the case may be.
Mark Search,
OK start search.
When a DVB transponder has been found:
Found stations
...
Search
Mark/unmark with
Mark the station,
OK Station will be ticked with
repeat for several stations.
Stations that already exist in the station overview
will be displayed with their station number on the
left.
Mark Store/Overwrite,
OK Stations marked with
Explanations of some search settings:
Signal Selection of range in which you want to search for the
source station.
(DVB-T/C/S)
Channel Direct input of channel.
(DVB-T)
Satellite Here you can select the satellite where the stations
(DVB-S) are to be searched for.
Band Here you can select the frequency band in which
(DVB-S) shall be searched.
Setting ranges:
Frequency DVB-T/C: Direct input of station frequency.
(DVB-T/C/S) DVB-S: Direct input of LNC frequency
Symbol rate Here you can specify the symbol rate
(DVB-S) Range: 1000-45000
Cable analog DVB-T DVB-C DVB-S
044.00 MHz
16
22000
Standard
71.5 dB
58 dBμV
0 E-7
1024 arte HD 1024 arte HD
1025 kabel eins HD 1025 kabel eins HD
1026 SPORT1 HD 1026 SPORT1 HD
1027 Cartoon Network 1027 Cartoon Network
1028 Spiegel TV HD 1028 Spiegel TV HD
Store/Overwrite
OK
. If necessary,
will be stored.
horiz/low 10694 - 11906 MHz
horiz/high 11544 - 12756 MHz
vert/low 10694 - 11906 MHz
vert/high 11544 - 12756 MHz
Back
Back
91