Loewe Connect ID 46 DR+ User Manual page 106

Connect ID 40-55 DR+
User guide
System settings
Control
DR +
You can adapt the Digital Recorder to your requirements.
Call settings for the digital recorder
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Control,
go to next column.
Mark more ...,
call other settings.
Mark DR+,
go to next column.
... DR+ Notify hid-
den sections
Jump dis-
tance
Smart Jump
Recording
subtitles
DR+
Streaming
Mark desired setting,
go to next column.
Make settings,
OK confirm setting.
Explanation of the DR+ setting options
Notify If an entry has been hidden in an archive recording,
hidden you can get informed by a screen message when
sections skipping a hidden area.
Factory setting: yes.
Jump Set the standard jump distance (in minutes) used
distance for jumping forwards or backwards in the movie by
briefly pressing the
Factory setting: 02 min.
Smart jump Activate or deactivate Smart jump function.
Factory setting: on.
Serial A broadcast programmed with the recording type
recording series is recorded only if it begins within the program-
tolerance med start time
numeric button on the remote control to enter the
time (always two-digit for 01 to 60 min.).
Factory setting:
Recording Select here whether subtitles are to be recorded for
subtitles DVB stations.
Factory setting: no
DR+ For setting options see right hand column.
Streaming
(1 for devices in DK, FIN, N or S: yes.
106
If a fade-out has already been executed in an existing
recording and you put "yes" here, after this point has been
passed you are informed during playback that the faded-out
area has just been skipped. "no" aborts this message.
or keys.
±
series recording tolerance. Use the
±
30 min.
(1 .
Call DR+ streaming settings
The DR+ settings are called (see left column).
Mark DR+ Streaming,
go to next column.
... DR+ Share DR+ ar-
Streaming
Notify start-
DR+ device
name
DR+ device
group name
IP port
number
DR+ standby
Mark desired setting,
go to next column.
Make settings,
OK confirm setting.
Explanation of the setting options for DR+ streaming
Share DR+ Specify here whether recorded broadcasts within
archive with your TV set's DR+ archive are to be accessible for
other devices viewing from other TV sets (server function).
Enabled programmes can also be played on other
UPnP-AV clients in the same network.
Also use Setting yes enables you, via the archive, to also view
other recordings from other TV sets that have accessible
archives. movies within the home network (client function).
Notify Your TV set can issue a message if a follow-me re-
started cording has been started on another TV set, which
„Follow me" you can view on this TV set..
recording
DR+ Give your TV set a unique name for quick identifica-
device name tion in DR+ Streaming.
DR+ device Give a name for your TV set group.
group name Using different group names enables you to group
your TV sets as required. Only TV sets under the
same group name can exchange data.
IP port IP port numbers are preset ex-factory. Under normal
number circumstances they do not require amending.
DR+ Set here how long your TV set is to continue to give
standby access to movies after it has been switched off.
This stand-by period is also activated as soon as data
exchange to another TV set has been completed.
If you select "yes" here, you will make the DR+ archive of
your TV set available to any other TV sets and UPnP clients
equipped with this feature. They will then be able to access
the archive over your home network.