Loewe Connect ID 46 DR+ User Manual page 21

Connect ID 40-55 DR+
User guide
Initial installation
Selecting
antennas
Connect antenna cable(s)
Your television will automatically search for stations. With
cables are available for your TV set and connect them to the correct antenna sockets,
which are specified here in the right-hand column.
Antenna cable(s) for:
Cable analog
Terrestrial (DVB-T)
Cable (DVB-C)
Satellite (DVB-S / cable 1)
Satellite (DVB-S / cable 2)
Back with
Select antenna cable.
OK Connect/disconnect antenna cable.
Ahead of each selected antenna, the symbol
appears.
Cable analog:
Terrestrial (DVB-T):
Cable (DVB-C):
Satellite (DVB-S/cable 1):
Satellite (DVB-S/cable 2): digital stations via
Proceed to next step.
Extent of
station search
Extent of station search
The CA module "name module" provides a special station list "name list".
Taking this into consideration, specify which stations are to be searched
automatically and mark at least one of the two items below with
All receivable stations excluding stations in the special station list
Stations in the special station list "name list"
Back with
Considering the plugged CA module(s) specify
which stations should be searched automatically.
If the CA module(s) do(es) not support this func-
tion or if no CA module is plugged in, this step will
be skipped.
Proceed to next step.
Depending on the antennas (analogue cable, DVB-T,
DVB-C, DVB-S) selected, the appropriate settings
appear below.
, highlight which antenna
OK
to antenna socket(s):
ANT TV
ANT TV
ANT TV
ANT SAT
ANT SAT2
Proceed with
analogue stations via
cable
digital stations via
antenna
digital stations via
cable
digital stations via
satellite
satellite
.
OK
Proceed with
Setting options for reception via analogue cable:
If you have not selected Cable analog in the list of available antennas:
Proceed to Setting options for DVB-T reception.
TV/col.
standard
TV/col. standard
Please select the TV/colour standard.
Back with
The selection of a Colour standard is only required
when the Location of TV set Other country was
selected. Otherwise, the country-specific default
settings will be preset when selecting the Location
of TV set. This step will be skipped then
Select appropriate colour standard.
Proceed to next step.
Depending on the antennas (analogue cable, DVB-T,
DVB-C, DVB-S) selected, the appropriate settings
appear below.
Automatic BG+L SECAM-BG
PAL-BG SECAM-DK
PAL-DK SECAM-L
PAL-I NTSC
Proceed with
21