Table of Contents
Advertisement
User's Manual
Parallel menu
Acknowledge
The pulse width of the ACK signal
0.5 µs
Mode1
1.0 µs
Mode2
4.0 µs
Mode3
Bi-direction
Bi-directional Centronics interface mode
NPAP mode
Whether the NPAP commands are used.
When using MarkVision™, the NPAP mode
must be Auto or On.
Serial menu
Baud rate
Data transfer speed on the serial interface
Pacing
Protocol of the serial interface
DTR polarity
Level of the DTR signal in the DTR protocol
ROBUST XON
ROBUST mode in the Xon/Xoff protocol
Network menu
NPAP mode
Whether the NPAP commands are used.
When using MarkVision™, the NPAP mode
must be Auto or On.
BootP
Whether the TCP/IP protocol that enables a
workstation to find its IP address is enabled or
disabled for the network adapter
IP address
A unique address of the printer in the TCP/IP
network environment
IP netmask
Bit mask that logically subdivides the network,
specifying a local network portion of the IP
address
IP gateway
A unique address of the equipment for the
gateway to outside of the enclosed
environment
Important:
See the next page for setting IP address, IP netmask, and IP gateway.
Clear warning
<Clear warning>
Clearing a consumables life counter (for the
developer unit or the drum unit)
Menu Items
PRINTING AND
PAPER HANDLING
2-31
Advertisement
Table of Contents
