Table of Contents
Advertisement
Adding Paper Sources
3-12
Caution:
Put the paper stack in the tray with the printing side faced down.
If paper is wavy or curled, remove waved or curled sheets of paper.
If paper is abnormally curled or becomes cylindrical after printing,
use the paper upside down. It may reduce a degree of curl.
4. Attach the rear guide to the
correct position. Locate
the mounting holes of the
desired paper size by
referring to the engraving
on the center plate.
Mount the rear guide in
reverse order of the
removal.
5. Load paper, move the right
paper guide to adjust both
guides to the width of
paper. Sure the paper fits
the tray and the stack of
paper does not exceed the
limit. (See Chapter 1 for
details.)
6. Return the paper tray.
Slide the tray back into the
printer.
7. Change the setting of the
paper size dial. Turn the
dial to the desired position:
A4, A5, B5, LTR, LGL, or
EXE engraved around the
dial.
User's Manual
Advertisement
Table of Contents
