Table of Contents
Advertisement
User's Manual
Setting Up
Put the other end of the
shaft on the other bearing
and close the ark-shaped
green lever to secure the
shaft.
6. Open the shutter of the
drum. Holding the top
center of the print unit,
push up backwards the
green-labeled handle of the
shutter under the print unit
and fix the shutter on the
hook.
7. Open the upper door. lift
th center portion under the
stopper of the upper door to
open it.
8. Orient the print unit.
Hold the top center of the
print unit with the green
drum facing you and adjust
the ends of the drum shaft
to the grooves on the sides
of the printer.
GETTING
STARTED
1-9
Advertisement
Table of Contents
