Fujitsu PRINTPARTNER User Manual page 76

User's Manual
Config menu
Personality Selecting an emulation (personality) without a
PJL command which clearly specifies the
emulation
Auto continue Automatic control of continuing recoverable
errors
On Automatically clears errors other than paper
mismatch 10 seconds after an error.
Ext Automatically clears errors including Paper
mismatch 10 seconds after an error.
I/O timeout Time interval allowed for switching the interface
I/O buffers Size of interface buffer
Power save Setting the time interval during which the
printer remains idle state before entering sleep
mode after printing last
On after 15 min Power save mode on. The printer enters sleep
mode after remaining idle state for ## minutes
On after 30 min
On after 60 min after printing last.
On after 120 min
Off Power save mode off. (Even in this mode, the
printer enters sleep mode after remaining idle
state for 180 minutes.)
Toner low Whether the printer stops printing when it
detects near end of toner.
Pre pick Earlier start of paper picking
Soft switch Functions like conventional DIP switches.
SW1-0 Buzzer mode off or on
SW1-1 Dither mode 1 (off) or 2 (on) (PCL6 600 dpi only)
Other switches Reserved for future use.
Important:
The soft switches are invalid for this printer. Never change the settings.
Menu Items
PRINTING AND
PAPER HANDLING
2-29