Table of Contents
Advertisement
User's Manual
Periodic Routine Maintenance
9. Orient the print unit.
Hold the top center of the
print unit with the green
drum facing you and adjust
the ends of the drum shaft
to the grooves on the sides
of the printer.
10.Install the print unit.
Slide the print unit at a 45
degree angle along the
grooves and towards the
back of the printer.
11.Seat the print unit in
place. Press down gently on
the top left and right
portions of the print unit
until it clicks into place.
12.Close the printer's upper
door. Press down firmly on
the front portion of the
upper door and make sure
the upper door is locked
completely.
Proceed to the next section.
MAINTENANCE
4-9
Advertisement
Table of Contents
