Table of Contents
Advertisement
User's Manual
4. Check the paper path for spilled toner. If it is spilt, clean the
paper path. See Cleaning the Paper Path later in this chapter.
Periodic Routine Maintenance
5. Disassemble the print
unit.
Pull the ark-shaped green
lever at one end of the
drum unit to release the
shaft of the drum unit from
the developer unit.
Then, gently pull out the
other end of shaft from the
developer unit to take apart
the developer unit and
drum unit.
Go to step 5a for developer
unit replacement, and 5b
for drum unit replacement.
6a.Remove a new developer
unit from its envelope and
shake the developer unit
by rocking it from side to
side several times.
Place the developer unit on
a level, steady place.
Remove the plastic seal
from the developer unit.
Gently pull off the seal
being carefully not to spill
toner. Handle to seal
carefully to avoid staining
your hands or clothes.
MAINTENANCE
4-7
Advertisement
Table of Contents
