Table of Contents
Advertisement
User's Manual
Problem
Pages have toner stains or
horizontal smudging
Toner insufficiently adheres
to or easily comes off paper
when you are printing thick
or special paper.
Paper become wavy or
printing is too light in
duplex printing when you
are printing thin paper.
Vertical lines appear in
solid black printing, stains
appear in the back of a
page, or paper is wrinkled
or curled.
Thin slant lines are too light.
Caution:
Whenever replacing the developer unit or drum unit due to any
troubles, clear the corresponding service-life counter (whether or not
the message display indicated
indicates the
"REPLACE PARTS"
wrong timing. See Replacing the Developer Unit or Drum Unit in
Chapter 4.
Print Quality Problems
Solutions
• If this problem occurs after a
paper jam, print several pages.
• Clean the paper path.
• If the fuser unit is damaged,
contact your dealer.
• Replace the drum unit.
Turn the thick paper mode on or
select the thickness control menu
then select an option in media
mode using the control panel.
Select the thickness control menu
then select an option in media
mode using the control panel.
Check if the thick paper mode is
on by using the control panel; if
the mode is on, turn it off.
Set the smoothing mode in the
Quality menu to ON.
"REPLACE PARTS"
), or the printer
message for the new unit at a
SOLVING
PROBLEMS
5-17
Advertisement
Table of Contents
