Left guide
Pressure plate
User's Manual
Changing the Paper Tray Size
The paper tray can be adjusted to one of the six paper sizes: A4, A5,
B5 (JIS B5), LTR (Letter), LGL (Legal), and EXE (Executive). To
change the size, follow these steps:
Left pin
Adding Paper Sources
Rear guide
1. Remove the paper tray
from the printer.
Right pin
Refer to the illustration for
the parts you adjust when
changing the size of the
tray.
Right guide
Center plate
2. Remove the rear paper
guide from the tray. Push
the left or right pin of the
rear guide inwards to release
the pin from the hole, then
release the other pin.
3. If you want to use the legal
size, move the center guide
one slot outwards. Lift the
rear end of the center guide
to detach it from the
pressure plate. Then, put
the front end of the center
guide into the adjacent slot.
ENHANCING &
CUSTOMIZING
3-11