Display Settings - Crestron TPMC-4SMD-FD Installation & Operation Manual

4.3" Designer Touch Screen
16 • 4.3" Designer Touch Screen: TPMC-4SMD-FD
On the TPMC-4SMD-FD, DHCP is enabled by default. To switch to a static IP
address, touch IP Address Settings on the Ethernet Setup menu to access the Edit
IP Address Settings screen. (Touch Back to return to the Panel Setup Options
menu.)
"Edit IP Address Settings" Screen
Touch the Enabled/Disabled button to toggle between enabling and disabling
DHCP. Next, touch the field for the Static IP Address, Static Subnet Mask, or
Static Default gateway desired. The on-screen keyboard opens. After entering the
addresses, touch OK to add the entries or CANCEL to cancel them.
On the Edit IP Address Settings screen, touch Edit DNS Servers to enter the
screen for editing these addresses, shown in the illustration below.
Touch Save to keep the new setting or Cancel to cancel it.
"Edit IP Address Settings" Screen (Showing DNS and WINS Servers)

Display Settings

On the Panel Setup Options menu, touch Display Settings to enter the Display
Settings menu. This menu provides controls to adjust Key LED Brightness and LCD
Brightness in addition to providing buttons to enter the Key LED Options and LCD
Wake Options screens. Touch Back to return to the Panel Setup Options menu.
Crestron TPMC-4SMD-FD
Installation & Operations Guide – DOC. 7174F