Crestron TPMC-4SMD-FD Installation & Operation Manual page 8

4.3" Designer Touch Screen
4 • 4.3" Designer Touch Screen: TPMC-4SMD-FD
Crestron PoE switches (CEN-SW-POE-5, CEN-SWPOE-16 or CEN-SWPOE-24, all
sold separately) may also be used to provide a total networking solution with built-in
PoE.
Occupancy Sensing
Crestron GLS series room occupancy sensors can be connected directly to the
TPMC-4SMD-FD to allow automation of the room's lighting, climate control, and
other devices.
Simple, Versatile Mounting
The TPMC-4SMD-FD installs easily using a 1 or 2-gang electrical box or 2-gang
UK electrical box. It can also be attached directly to drywall and other surfaces over
the front of a roughly 2 inch (~51 mm) square hole. It requires only 1/2 inch
(~13 mm) mounting depth while protruding less than an inch (~25 mm) from the
2
wall surface.
1. H.264 compatible camera required.
2. Requires a minimum cut out or electrical box opening of 1/7" (~43 mm) high x 2.0" (~51 mm) wide.
Refer to "Specifications" which starts on page 5 for electrical box compatibility.
Crestron TPMC-4SMD-FD
Installation & Operations Guide – DOC. 7174F