•
PFC enabled or disabled
•
No bandwidth limit or no ETS processing
•
ETS uses the DCB MIB IEEE 802.1azd2.5.
Data Center Bridging Exchange Protocol (DCBx)
By default, the data center bridging exchange (DCBx) protocol is disabled; ETS is also disabled.
DCBx allows a switch to automatically discover DCB-enabled peers and exchange configuration information.
PFC and ETS use DCBx to exchange and negotiate parameters with peer devices. DCBx capabilities include:
•
Discovery of DCB capabilities on peer-device connections.
•
Determination of possible mismatch in DCB configuration on a peer link.
•
Configuration of a peer device over a DCB link.
DCBx requires the link layer discovery protocol (LLDP) to provide the path to exchange DCB parameters with
peer devices. Exchanged parameters are sent in organizationally specific TLVs in LLDP data units. For more
information, see
Link Layer Discovery Protocol
parameter exchange:
PFC parameters
PFC Configuration TLV and Application Priority Configuration TLV.
ETS parameters
ETS Configuration TLV and ETS Recommendation TLV.
(LLDP). The following LLDP TLVs are supported for DCB
Data Center Bridging (DCB)
295