Guest And Authentication-Fail Vlans - Dell C9000 Series Networking Configuration Manual

The illustration shows the configuration before connecting the end user device in black and blue text, and
after connecting the device in red text. The blue text corresponds to the preceding numbered steps on
dynamic VLAN assignment with 802.1X.
Figure 7. Dynamic VLAN Assignment
1 Configure 8021.x globally (refer to
(refer to the illustration
2 Make the interface a switchport so that it can be assigned to a VLAN.
3 Create the VLAN to which the interface will be assigned.
4 Connect the supplicant to the port configured for 802.1X.
5 Verify that the port has been authorized and placed in the desired VLAN (refer to the illustration in
Dynamic VLAN Assignment with Port

Guest and Authentication-Fail VLANs

Typically, the authenticator (the Dell system) denies the supplicant access to the network until the supplicant
is authenticated. If the supplicant is authenticated, the authenticator enables the port and places it in either
Enabling 802.1X) along with relevant RADIUS server configurations
inDynamic VLAN Assignment with Port
Authentication).
Authentication).
802.1X 113