Configuring Poe Or Poe; Enabling Poe Or Poe+ On A Port; Configuration Tasks For Poe Or Poe - Dell C9000 Series Networking Configuration Manual

• Advertising the Extended Power through MDI
• Advertising Extended Power Though dot3–TLVs
• Detecting Legacy Devices and Allocating Power
• Deploying Voice Over IP (VoIP)
• Managing PoE on the Port Extender

Configuring PoE or PoE+

Configuring PoE or PoE+ is a two-step process:
1 Connect the IEEE 802.3af/802.3at-compliant powered device directly to a port.
2 Enable PoE or PoE+ on the port extender.

Enabling PoE or PoE+ on a Port

By default, PoE or PoE+ are disabled.
Configuration tasks for PoE include:
• Enabling PoE and managing the inline power supplied to the port extender ports using the power
inline mode command. To manage inline power in a port extender, use Configure Class or Static
mode. See Configure Power Management Mode (Class and Static Mode).
• Limiting the maximum amount of power (in milliwatts) available to a powered device using the power
inline {[max_milliwatts] | priority {critical | high | low}} command. See
Allocating PoE Power on a PE

Configuration Tasks for PoE or PoE+

This chapter describes how to configure and manage the PoE or PoE+ feature on C1048P PE ports.
Configuration tasks for PoE include:
• Configuring Power Management Mode - Class and Static Mode
• Managing Ports using Power Priority and the Power Budget
• Allocating PoE Power to Power Devices to a Connected PE Interface
• Setting the Global Threshold limit PoE Power Budget
• Detecting and Allocating Power for Legacy Powered Devices
• Advertising Extended Power Though dot3–TLVs
• Advertising the Extended Power through MDI
• Deploying VOIP
• Managing PoE on a PE
• Upgrading the PoE Controller
• Stopping and Restarting Power Delivery
• Monitoring the Power Budget
• Display Power Consumption on the Port Extender
and Determining the Power Priority for a Port.
Power over Ethernet (PoE) 873