0
Management online
1
Member
not present
2
Member
not present
3
Standby
online
4
Member
not present
5
Member
not present
6
Member
not present
7
Member
not present
Verifying a PE Stack Master and Standby
The Status LED on the front panel of a PE stack unit identifies the unit's role in the stack.
•
Off indicates that the unit is a stack member.
•
Off also indicates that the unit is stack standby.
•
Solid green indicates that the unit is the stack master (management unit).
Displaying PE Stack Information
To display information about a PE stack configuration, enter the following show commands in EXEC Privilege
mode.
•
Display information about PE stack units connected to the C9010, including the discovery status.
show pe
Dell# show pe
Maximum number of PE Units allowed: 40
Current number of PE units in the system: 8
Codes:
A - Active, I - Inactive
Reason: CTM - Card Type Mismatch, CAM - CAM ACL Mismatch
SVM - Software Version Mismatch, UE - Unknown Error
Offline Reason: UNP - Unit Not Present,
PE-ID assigned: 0
Status: online
System Mac: a0:68:00:3f:92:bc
PE Up Time: 14:13:03
PE Discovery Status: Provisioned PE
User Configured Cascade Ports: Te 0/0(A),Te 2/22(A)
Cascade LAG: Po 258(Up)
-------------------------------------------------------------------
Stack-id
Status
-------------------------------------------------------------------
0
online
1
online
2
online
3
online
4
online
5
online
6
online
7
online
•
Display summary information about the PE stack units attached to the master PE. Enter the PE ID of the
master unit.
C1048P
C1048P
C1048P
C1048P
ICE - IPC CP Error, IRE - IPC RP Error
ISE - IPC Setup Error, CVE - Card Validation Error
Reason
Type
-
C1048P
-
C1048P
-
C1048P
-
C1048P
-
C1048P
-
C1048P
-
C1048P
-
C1048P
1-0(0-4149) 52
1-0(0-4149) 52
UnitMac
a0:68:00:3f:92:bc
6c:c0:00:11:22:33
34:17:eb:00:bb:09
62:74:00:41:54:c8
62:74:00:41:54:c9
cb:28:00:42:bd:7c
62:74:00:41:54:01
6c:c0:00:43:11:11
Port Extender (PE) Stacking
No. of Ports
52
52
52
52
52
52
52
52
853