Siemens SIMATIC ET 200SP Manual page 45

Parameter
Hardware interrupt: Zero
crossing
1
Hardware interrupt: New
Capture value available
1
Hardware interrupt:
Synchronization of the
counter by an external
signal
1
Set output
Substitute value for DQ
1
Count direction of the
DQ function
1
Pulse duration [ms/10]
1
Technology Module TM Count 1x24V (6ES7138-6AA00-0BA0)
Manual, 02/2017, A5E33002339-AB
Value range
Deactivated
•
Activated
•
Deactivated
•
Activated
•
Deactivated
•
Activated
•
Use by user program
•
Between comparison value and
•
high limit / measured value >=
comparison value
Between comparison value and
•
low limit / measured value <=
comparison value
At comparison value for a pulse
•
duration
After set command from CPU
•
until comparison value
Between comparison value 0
•
and 1
Not between comparison value 0
•
and 1
0
•
1
•
Forward
•
Backward
•
In both directions
•
0...65535
Default setting Re-
configura-
tion in
RUN
Deactivated Yes
Deactivated Yes
Deactivated Yes
DQ0, DQ1: Yes
Between com-
parison value
and high limit
DQ0, DQ1: 0 Yes
In both direc- Yes
tions
5000 (corre- Yes
sponds to
0.5 s)
Configuring/address space
4.4 Parameters
Effective range with
configuring software
HSP for HSP for
STEP 7 STEP 7;
(TIA Portal) GSD file
Channel Channel
Channel Channel
Channel Channel
Channel Channel
Channel Channel
Channel Channel
Channel Channel
45