Siemens SIMATIC ET 200SP Manual page 30

Configuring/address space
4.1 Configuring
Additional information
A detailed description of the counting and measuring functions and their configuration is
available:
● In the Counting, Measurement and Position Detection function manual available for
download on the Internet
(http://support.automation.siemens.com/WW/view/en/59709820)
● In the STEP 7 (TIA Portal) information system under "Using technology functions
> Counting, measurement and position input > Counting, measurement and position input
(S7-1500)"
A detailed description of the use of Motion Control and its configuration is available:
● In the S7-1500 Motion Control function manual available as a download from the Internet
(http://support.automation.siemens.com/WW/view/en/59381279)
● In the STEP 7 (TIA Portal) information system under "Using technology functions
> Motion Control > Motion Control (S7-1200, S7-1500)"
Hardware Support Packages (HSP)
STEP 7 (TIA Portal)
If the "Fast Mode" operating mode of the technology module is not yet integrated in the
TIA Portal version you are using, you can integrate a corresponding module with HSP0199.
The Hardware Support Packages (HSP) are available for download on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/72341852).
Alternatively, they can be accessed for downloading via the menu bar of STEP 7
(TIA Portal): "Options > Support Packages > Download from the Internet".
STEP 7
The Hardware Support Packages (HSP) are available for download on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/23183356).
GSD file
The respective GSD file for the ET 200SP distributed I/O system is available for download on
the Internet:
● GSD file PROFINET IO (http://support.automation.siemens.com/WW/view/en/57138621)
● GSD file PROFIBUS DP (http://support.automation.siemens.com/WW/view/en/73016883)
30
Technology Module TM Count 1x24V (6ES7138-6AA00-0BA0)
Manual, 02/2017, A5E33002339-AB