Toshiba E-STUDIO477S Advanced Manual page 111

5
Select a folder for the remote destination.
1) Select FTP, SMB, NetWare IPX, NetWare IP, or
FTPS as a protocol to transfer the file.
2) Press [SERVER NAME], [NETWORK PATH],
[LOGIN USER NAME], [PASSWORD] and/or
[COMMAND PORT] and specify the file
destination.
3) Finally, press [OK].
• [SERVER NAME] (FTP, NetWare IPX, NetWare IP, and
FTPS only)
When you select [FTP]:
Enter the IP address of the FTP server. For example, to
transfer the data to "ftp://10.10.70.101/user01/internetfax/,"
enter "10.10.70.101" in this box.
When you select [NetWare IPX]:
Enter the name of the NetWare file server or the Tree/
Context (when NDS is available).
When you select [NetWare IP]:
Enter the IP address of the NetWare file server.
When you select [FTPS]:
Enter the IP address of the FTP server. For example, to
transfer the scanned data to "ftps://10.10.70.101/user01/
scan/," enter "10.10.70.101" in this box.
• [NETWORK PATH]
When you select [FTP]:
Enter the path to a folder in the FTP server where you
want to store the data. For example, to transfer the data
to "ftp://10.10.70.101/user01/internetfax/," enter
"user01\internetfax" in this box.
When you select [SMB]:
Enter the network path to the folder where you want to
store the data.
When you select [NetWare IPX] or [NetWare IP]:
Enter the path to a folder in the NetWare file server where
you want to store the data. For example, to transfer the
data to the "sys\internetfax" folder in the NetWare file
server, enter "\sys\internetfax" in this box.
When you select [FTPS]:
Enter the path to a folder in the FTP server where you
want to store the scanned data. For example, to transfer
the scanned data to "ftps://10.10.70.101/user01/scan/,"
enter "user01\scan" in this box.
• [LOGIN USER NAME]
When you select [FTP]:
Enter the log-in user name for the FTP server if required.
When you select [SMB]:
Enter the user name to access the network folder if
required.
When you select [NetWare IPX] or [NetWare IP]:
Enter the log-in user name for the NetWare file server if
required.
When you select [FTPS]:
Enter the log-in user name for the FTP server if required.
• [PASSWORD]
When you select [FTP]:
Enter the log-in password for the FTP server if required.
When you select [SMB]:
Enter the password for accessing the network folder if
required.
When you select [NetWare IPX] or [NetWare IP]:
Enter the log-in password for the NetWare file server if
required.
When you select [FTPS]:
Enter the log-in password for the FTP server if required
• [COMMAND PORT] (FTP and FTPS only)
Enter the port number to be used for command
execution. By default, a hyphen "-" is entered in this box,
and the port number set by the administrator is used.
Change the entry in this box only when you want to use
another port number.
Memo
• Pressing each button displays an on-screen keyboard.
Enter each item using the keyboard and digital keys,
and then press [OK] to set the entry.
6
Define the settings for the new file(s) as
required.
1) Press [FILE NAME] and change the file name.
2) Select an option for the FILE FORMAT and/or
MULTI/SINGLE PAGE settings.
3) Finally, press [OK].
• [FILE NAME]
Pressing the button displays an on-screen keyboard.
Change the file name using the keyboard and digital
keys, and then press [OK] to set the entry. The file name
can consist of a maximum of 128 characters.
Memo
• The trailing characters in a file name (maximum 74)
may be deleted depending on the type of letters used.
• FILE FORMAT
[PDF] — Press this button to store your scan as a PDF
file.
[TIFF] — Press this button to store your scan as a TIFF
file.
[XPS] — Press this button to store your scan as an XPS
file.
- 111 -
INTERNET FAX
1
2
3
4
5
6
7