SETTING ITEMS (ADMIN)
1
On the CONFIRMATION screen of the
FACTORY DEFAULT screen, press [OK].
1
2
The initialization begins.
Note
• If you want to back up the setting data and user data
before initialization, use the cloning function to create
3
clone files.
For details of the cloning function, see the following
page:
P.171 "Creating or installing clone files"
• When the initialization fails, the message "The process
failed." will be displayed. In this case, press [CLOSE],
and perform the operation again.
2
Press [OK] to reboot the equipment.
4
5
The equipment reboots.
6
7
- 216 -