Toshiba E-STUDIO477S Advanced Manual page 210

SETTING ITEMS (ADMIN)
3
Select the transmit power and press
[NEXT].
1
2
Select the low transmit power if you want to limit the area
that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
4
Confirm the settings and press [FINISH].
3
4
Memo
• If you want to change the settings, press [PREV] to
move back to the screen that you want to change and
then repeat the operation.
5
5
Press [YES], and wait until the setting is
reflected.
6
Selecting no security mode
7
You can also set no security for wireless access.
Note
• If you do not set no security, anyone knows how the SSID
can connect to the wireless network. Therefore, it is
recommended to set the security if it is possible.
1
Press [NONE] and press [NEXT].
The TRANSMIT POWER SETTINGS screen is displayed.
2
Select the transmit power and press [NEXT]
button.
Select the low transmit power if you want to limit the area
that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
3
Confirm the settings and press [FINISH]
button.
Memo
• If you want to change the settings, press [PREV] to
move back to the screen that you want to change and
then repeat the operation.
- 210 -