Toshiba E-STUDIO477S Advanced Manual page 203

9
Press [YES], and wait until the setting is
reflected.
Selecting WPA/WPA2/802.1X security mode
with PEAP protocol
Using the WPA/WPA2/802.1X with the PEAP protocol, you
must install the CA certification file in the equipment. This
equipment uses the user name and password to authenticate
the access rights to the wireless network, and the RADIUS
server authenticate this equipment using the CA certification
file.
Note
• When using the WPA/WPA2/802.1X with the PEAP
protocol, you must install the CA certification file in the
equipment using TopAccess first. For instructions on how to
install the CA certification using TopAccess, refer to
TopAccess Guide.
1
Press [WPA], [WPA2] or [802.1X], and then
[NEXT].
The AUTHENTICATION SETTINGS screen is displayed.
Note
• To select [TKIP] or [AES (CCMP)], press [WPA] or
[WPA2], or to select [DYNAMIC WEP], press [802.1X].
2
Press [PEAP] and press [NEXT].
The WIRELESS AUTHENTICATION (PEAP) screen is
displayed.
3
Enter the following items and press [NEXT].
• [EAP USER NAME]
Press this to enter the EAP user name that is used for the
authentication.
• [EAP PASSWORD]
Press this to enter the EAP password that is used for the
authentication.
• [RETYPE PASS]
Press this to enter the EAP password again that you
enter in the EAP PASSWORD field.
Memo
• When pressing each button, the letter entry screen is
displayed. Enter the value using the keyboard and
digital keys, and press [OK] to set the entry.
4
Specify the following items and press
[NEXT].
• ENCRYPTION BETWEEN AP AND STA.
Select the encryption type that is used for the
communication between Access Point and this
equipment.
- 203 -
SETTING ITEMS (ADMIN)
1
2
3
4
5
6
7