Capture Screen - PRESONUS studiolive III series Owner's Manual

7 SD Recording
7.3

Capture Screen

Capture Screen
7.3
PreSonus Capture is a multitrack digital-audio recording application designed to
make recording with StudioLive mixers quick and easy. This application is built into
StudioLive Series III mixers, allowing you to track directly to an SD card using the
same high-quality audio engine as PreSonus' groundbreaking Studio One DAW.
Session files recorded on the SD Card can be opened directly in Studio One and
Capture – no conversion or exporting necessary.
1
2
3
4
5
6
7
1. Record Duration. Shows the total recorded length of the current Session.
2. Current Position. Shows the current position of the recording and playback.
3. Timeline. Shows the current cursor location in the timeline of the current
Session, along with any Markers that you've placed.
4. Arm All Tracks. Touching this button will arm all 38 tracks for recording. This will
record all 32 input channels, both stereo Aux Inputs, and your Main mix.
5. Arm Selected Tracks. Press the Selected button to enable channel selection
mode. In this mode, you can press the Select buttons on each channel in the
mixer to arm specific channels for recording. When a channel is selected, its
Select button glows steadily. When a channel is not selected, the button flashes.
6. All Digital Source. Touch this button to route audio from the Capture Session
to the input channels. Touch this button again to go back to the previously
established routing.
7. Recording Lock. Touch this button to enable Recording Lock mode. When this
mode is enabled, recording cannot be stopped by pressing the Stop button in
the Transport controls. To disable this mode, touch the lock button again.
8. Jog. Touch this button to use the Master Control encoder as a jog-wheel, to
move the recording/playback cursor.
9. Current Timeline Position. Displays the current playback and recording
position.
10. Remaining Time. Shows the amount of time available for recording on the
connected recording medium
11. Session Name. Displays the name of the current Session.
12. Exit Session. Closes the Session and returns to Live Recording Edit Screen.
8
StudioLive™ Series III
Owner's Manual
12
11
10
9
60