4
Basic Mixing and Routing
4.9
Talkback System
Level
Page
OL
-2
Processor
(Insert)
-12
-24
Channel
-36
-48
-65
Input
Mic/Line
Assign
Stereo
4.9
Talkback System
Talkback Edit Screen
4.9.1
To add a channel to a fixed Subgroup:
1.
Select the channel and press the Subgroup button in the Assign section of
Comp
the Fat Channel. This will bring up the Assigns menu on the Touchscreen.
EQ / Dyn
2.
The four fixed Subgroups are at the top of the screen. Touch the Subgroup
to which you'd like to assign the channel.
Preset
The StudioLive features a Talkback microphone input on the back panel. This can be
routed to your choice of Aux outputs, as well as the Main output. The talkback signal
is silent by default.
To enable talkback, press the Talk button.
To adjust the Talkback level in any mix, Press the Aux Inputs button and use the
Talkback channel fader to set the desired level.
Press the Talkback Channel's Select button to open the Talkback Edit screen,
giving you access to additional options.
• Source. Sets the signal source for the Talkback channel. Select between Analog
(Talkback mic input) and AVB (designated Talkback signal from a networked
audio device).
• Preamp Gain. Sets the preamp gain for the Talkback mic input.
• Talk Destination. From this screen you can also select the mixes to which you'd
like to route the Talkback input.
StudioLive™ Series III
Owner's Manual
31