PRESONUS studiolive III series Owner's Manual page 82

8 Master Control
8.5 Scenes
Scroll to an empty location and press Store to enter a custom name. The
3.
StudioLive allows you to customize the name with uppercase and lowercase
letters and a selection of numerals and punctuation marks.
4. Press the Store button again to save the scene to your mixer's memory.
The Store button will illuminate while the scene is being written to the
StudioLive's internal memory. Once the scene is saved, the Store button will
return to its unlit status.
To recall a scene, touch one of the stored scenes in the library list to select it, then
press the Recall button to recall the scene.
To the right of this list is a grid of filter buttons. These let you select the parameters
you want to be affected when you recall the next scene, from the following list of
choices. With the exception of Phantom Power, all filters are enabled by default:
• Name
• Preamps
• FX
• GEQ
• Input EQ/Dyn
• Output EQ/Dyn
• Aux Mix
• Faders
• Assigns
• +48V
• Mutes
• DCA Groups
• Mute Groups
In some cases, you may want to protect a channel or bus from being affected when
scenes are recalled. To do this, touch the Scene Safe button. This brings the Scene
Safe screen to the touchscreen.
This screen shows you a list of all available channels and buses. Touch the channel or
bus of your choice to put it into scene safe mode, and protect it from changes when
scenes are recalled.
StudioLive™ Series III
Owner's Manual
78