Transport Controls; Sound Check Button - PRESONUS studiolive III series Owner's Manual

7 SD Recording
7.4

Sound Check Button

Transport Controls

7.3.1
Sound Check Button
7.4
When a new Session is created or an existing Session is loaded, the Transport buttons
give you control over recording, playback, and navigation through the timeline of the
current Session. Use these controls in conjunction with those in the Capture screen
for total control of your recording and playback needs. The button functions are
as follows:
1 2
1. Return to Zero. Press this button to move the recording/playback cursor to the
start of the Session timeline.
2. Stop. Press this button to stop playback or recording.
3. Play. Press this button to begin playback from the current cursor position in the
Session timeline.
4. Record. Press this button to begin recording from the current cursor position in
the Session timeline.
We've all been there. The drummer is stuck in traffic. The guitarist is stuck at work.
And you're stuck at front-of-house (FOH) with a hyped up lead singer and bass player
and no way to dial in a front-of-house mix, let alone set up the singer's in-ear mix.
Don't panic! With Capture's Virtual Soundcheck mode, dialing a good rough mix
without the band—or with half the band missing—is quick and simple.
1. To begin, create a new Session, press the Soundcheck button on your
StudioLive mixer.
2. This will launch the Load Session screen. Select the previously recorded session
you would like to use for your Virtual Soundcheck.
3. The Recall button will begin to flash. Press the Recall button to load the saved
Session. This will also engage all the SD channel returns.
4. Your mixer scene is automatically saved with your Capture session. Enabling the
Load Mix function will load the saved StudioLive mix scene as well.
5. Use the Transport controls to playback the recorded audio and dial in your mix.
6. When you have finished setting up your mix, press the Soundcheck button again
to exit. This will close the Capture session and disengage all the SD returns on
your StudioLive, leaving the track labels on your mixer.
3 4
StudioLive™ Series III
Owner's Manual
61