Regency C34 Classic Owners & Installation Manual page 22

installation
|
22
when cut will seat onto both the starter
collar and the 90
section of rigid pipe seats into the
90
o
side of pipe.
Dismantle all pipe sections including vent
terminal.
4. Attach the adjustable pipe section to the vent
pipe before connecting the inner pipe.
down.
tions.
terminal assembly through the wall thimbles
to be drilled through the wall thimble on all
4 corners.
22 |
Regency CLASSIC™ C34-10 Direct Vent Freestanding Gas Stove
®
elbow.
o
6. A bead of non-hardening mastic should
be run around both the termination and
-
collar.
10 Slide the decorative Thimble Cover over the
-
Slide the trim collar over the adjustable pipe
sections to cover the joint of the telescopic
section.
-
11. Slide the 90
propriate fasteners for stucco, brick,
concrete, or other types of sidings.
o
sections.
-
around the appliance adapter and secure
14. Attach the pipe section onto the starter collar
should be facing the wall.
elbow onto the pipe section
o
90
o
pipe to properly mate to the elbow. Seal
down.
If the pipe needs to be touched up, use only
Stove Paint.
with Mill-Pac.
-