Cruise Control Indicator Light; Cruise Control Set Indicator Light - Subaru Forester 2017 Owner's Manual

To decrease the speed (by the
RES/SET switch)
Press the RES/SET switch to the SET
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and treated as the new
set speed.
U.S.-spec. models
When the difference between the actual
vehicle speed and the set speed is small,
the set speed can be lowered 1 mph (1.6
km/h) each time by pressing the RES/
SET switch to the SET side quickly.
Except U.S.-spec. models
When the difference between the actual
vehicle speed and the set speed is small,
the set speed can be lowered 1 km/h each
time by pressing the RES/SET switch to
the SET side quickly.
NOTE
If the RES/SET switch is repeatedly
operated quickly to the SET side, the
set vehicle speed displayed in the
combination meter becomes the low
speed setting. However, when the set
vehicle speed is set to a speed much
lower than the actual vehicle speed, the
set speed may be reset to the actual
vehicle speed.
To decrease the speed (by brake
pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
Starting and operating/Cruise control
desired speed, press the
switch to the SET side once. Now the
desired speed is set and the vehicle will
keep running at that speed without de-
pressing the accelerator pedal.

Cruise control indicator light

Refer to Cruise control indicator light
3-32.
Cruise control set indicator
light
Refer to Cruise control set indicator light
3-32.
7-57
RES/SET