Power Window Operation By Driver - Subaru Forester 2017 Owner's Manual
Hide thumbs
Also See for Forester 2017:
- Quick reference manual (21 pages) ,
- Quick reference manual (33 pages) ,
- Owner's manual (106 pages)
Table of Contents
Advertisement
one-touch auto up/down function will
not operate. Refer to Initialization of
power window
2-38.
The power windows operate only when
the ignition switch is in the ON position.
Power window operation by
driver
Driver s side power window
switches
1)
Lock switch
2)
For driver s window (with one-touch auto
up and down feature)
3)
For front passenger s window (with one-
touch auto up and down feature) (if
equipped)
4)
For rear left window
5)
For rear right window
All door windows can be controlled by the
power window switch cluster at the driver
side door.
Operating the driver s window
1)
Automatically open/close
2)
Open/close
To open:
Press the switch down lightly and hold it.
The window will open as long as the
switch is held.
NOTE
If you continue to hold the AUTO
switch in the down position after the
window has been fully opened, the
circuit breaker may activate for a short
time and the window may not operate.
Allow several seconds for the system
Keys and doors/Windows
to reset without touching the switch,
and the window will begin to operate
normally on its own.
This switch also has a one-touch auto
down feature that allows the window to be
opened fully without holding the switch.
Press the switch down until it clicks and
release it, and the window will fully open.
To stop the window halfway, pull the
switch up lightly.
To close:
Pull the switch up lightly and hold it. The
window will close as long as the switch is
held.
NOTE
If you continue to hold the AUTO
switch in the up position after the
window has fully closed, the circuit
breaker may open and the system may
not operate. After several seconds, the
window will be able to be opened by
holding the switch down until it is fully
opened. The AUTO function will not
operate. The window can be raised by
pulling up on the switch several times
until the window is fully closed.
To reset to normal operation, initialize
the power window to reactivate the
one-touch auto up/down function. Re-
fer to Initialization of power window
CONTINUED
2-33
Advertisement
Chapters
Table of Contents
