Connecting A Trailer - Subaru Forester 2017 Owner's Manual

Hide thumbs Also See for Forester 2017:
Table of Contents

Advertisement

traffic safety hazard.
. Although towing regulations for
trailer or caravan vehicles vary
by state/region, all regulations
agree that specifications such
as the maximum gross trailer
weight must not exceed the les-
ser of the following:
Maximum gross trailer weight
M a x i m u m g r o s s t o n g u e
weight
GVWR
GAWR
. Failure to comply with the proce-
dures set forth will not only
compromise your safety, but will
also negate your insurance cov-
erage and/or may violate the
state road and traffic acts and
regulations.
. Use only the ball mount supplied
with this hitch. Use the hitch only
as a weight carrying hitch. Do not
use with any type of weight
distributing hitch.
. The standard bumper beam must
be installed after you remove the
trailer hitch. Consult a SUBARU
dealer for purchase of a standard
bumper beam if you do not have
the original.
. Safety performance is decreased
and there is increased risk of
injury to passengers in the case
of an accident if the trailer hitch
or a standard bumper beam is
not installed. One of them must
always be installed on the vehi-
cle.
. If a trailer hitch is installed, it is
not possible to install the rear
towing hook.
When towing a trailer, refer to Trailer
towing
8-19.
Driving tips/Trailer hitch (dealer option)

Connecting a trailer

1)
Ball mount
2)
Hitch pin
3)
Safety pin
A)
Hitch receiver tube
1. Insert the ball mount into the hitch
8-17
CONTINUED

Advertisement

Table of Contents
loading

Table of Contents