Subaru Forester 2017 Owner's Manual page 131

2-28
Keys and doors/Alarm system
tically lock.
To arm the system using power
door locking switches
1. Close all windows.
2. Remove the key from the ignition
switch (models without keyless access
with push-button start system )/turn the
push-button ignition switch to the OFF
position (models with keyless access with
push-button start system ).
3. Open the doors and get out of the
vehicle.
4. Make sure that the engine hood is
locked.
5. Close the doors (and the rear gate) but
leave only the driver s door or the front
passenger s door open.
6. Press the front side ( LOCK side) of
the power door locking switch to set the
door locks.
7. Close the door. An electronic chirp will
sound once, the hazard warning flashers
will flash once and the security indicator
light will start flashing rapidly. After rapid
flashing for 30 seconds (standby time), the
indicator lights will then flash slowly (twice
approximately every 2 seconds), indicat-
ing that the system has been armed for
surveillance.
To arm the system using the key-
less access function (if equipped)
1. Close all windows and the moonroof (if
equipped)
2. Turn the push-button ignition switch to
the OFF position.
3. Open the doors and get out of the
vehicle.
4. Make sure that the engine hood is
locked.
5. Close all doors and the rear gate.
1) Door lock sensor
Security indicator light (type A)