Vehicle Dynamics Control Off Indicator Light; Warning Chimes And Warning Light Of The Keyless Access With Push-Button Start System (If Equipped) - Subaru Forester 2017 Owner's Manual

Vehicle Dynamics Control opera-
tion indicator light
The indicator light flashes during activa-
tion of the skid suppression function and
during activation of the traction control
function.
NOTE
. The light may remain illuminated for
a short period of time after the engine
has been started, especially in cold
weather. This does not indicate the
existence of a problem. The light
should turn off as soon as the engine
has warmed up.
. The indicator light illuminates when
the engine has developed a problem
and the CHECK ENGINE warning light/
malfunction indicator light is on.
The Vehicle Dynamics Control system is
probably malfunctioning under the follow-
ing condition. Have your vehicle checked
at a SUBARU dealer as soon as possible.
. The light does not turn off even after
the lapse of several minutes (the engine
has warmed up) after the engine has
started.
Instruments and controls/Warning and indicator lights
Vehicle Dynamics
Control OFF indicator
light
The light illuminates when the Vehicle
Dynamics Control OFF switch is pressed
to deactivate the Vehicle Dynamics Con-
trol system.
The Vehicle Dynamics Control system is
probably malfunctioning under any of the
following conditions. Have your vehicle
checked at a SUBARU dealer immedi-
ately.
. The light does not illuminate when the
ignition switch is turned to the
position.
. The light does not turn off even once
several seconds have elapsed after the
ignition switch has been turned to the
ON position.
Warning chimes and warning
light of the keyless access
with push-button start sys-
tem (if equipped)
ON
Access key warning light (type A)
Access key warning light (type B)
3-25
CONTINUED