Viewing Range On The Screen - Subaru Forester 2017 Owner's Manual

is displayed.
1. Set the ignition switch to ON .
2. Set the shift lever/select lever to R .
NOTE
. For models with the genuine
SUBARU navigation or audio system,
while the navigation system is acti-
vated, the image of the rear view
camera will not be displayed. However,
the image of the rear view camera has
priority over other screen displays.
. The image of the rear view camera
has priority over other screen displays.
. The image of the rear view camera is
horizontally reversed as is the case
with the vehicle rearview mirror or the
side view mirror.
. It may be difficult to see the image of
the rear view camera in the following
cases. This is not a malfunction of the
camera.
The vehicle is used for towing or
a trailer hitch is installed.
The vehicle is in a dark place (at
night, in a tunnel, etc.).
The vehicle is in an extremely hot
or cold place.
An object (such as raindrops,
snow, dirt, etc.) that disturbs the
view of the rear view camera sticks
to the lens of the camera.
Strong light shined directly on
the camera lens (occasionally, there
are vertical lines on the screen).

Viewing range on the screen

CAUTION
The range that can be viewed with
the rear view camera is limited.
Always be sure to check with your
eyes when moving backward and
proceed slowly.
Range of view
Interior equipment/Rear view camera
Range of view
Image from camera
The area from the rear end of the bumper
can be viewed. Areas at both ends of the
bumper and areas just under the bumper
cannot be viewed.
CONTINUED
6-19