Subaru Forester 2017 Owner's Manual page 194

By operating the or switch on the
steering wheel, you can select the menu.
Pull the /SET switch to enter the
selected menu.
NOTE
If you enter the Go Back menu, the
system will return to the previous
screen.
Screen Settings
After entering the Screen Settings menu,
select one of the following menus.
Welcome Good-bye Screen
The welcome screen/good-bye screens
can be activated or deactivated. Select
On to activate the screens. Select Off
to deactivate the screens.
Gauge Initial Movement
The movement of the meter needles and
gauge needles that occurs when the
ignition switch is turned to the ON
position can be activated or deactivated.
Select On to activate. Select Off to
deactivate.
Languages
Operate the or switch on the
steering wheel to display the preferred
language. Then pull the /SET switch to
select the displayed language.
Instruments and controls/Multi information display (models with type B combination meter)
EyeSight (models with EyeSight
system)
NOTE
For models with the EyeSight system,
refer to the Owner s Manual supple-
ment for the EyeSight system.
After entering the EyeSight menu, select
one of the following menus.
Warning Volume
The volume of the warning buzzer that
sounds when the EyeSight system is in
use can be set in 3 stages ( Max , Mid
and Min ).
Lead Vehicle Acquisition Sound
When adaptive cruise control is used, the
buzzer that sounds if a vehicle is detected
in front or if detection is not possible can
be activated or deactivated. Select On to
activate the buzzer. Select Off to deac-
tivate the buzzer.
Lead Vehicle Moving Monitor
Function
When the lead vehicle moving monitor
function is in operation, the buzzer that
sounds if a vehicle in front has started can
be activated or deactivated. Select On to
activate the buzzer. Select Off to deac-
tivate the buzzer.
BSD/RCTA (if equipped)
After entering the BSD/RCTA menu,
select the Warning Volume menu. You
can set the volume of the warning buzzer
for RCTA (Rear Cross Traffic Alert). You
can select Max , Mid , Min or Off .
RAB (if equipped)
NOTE
For models with the RAB (Reverse
Automatic Braking) system, refer to
Reverse Automatic Braking System
7-66.
After entering the RAB menu, select one
of the following menus.
Warning Volume
The volume of the warning sound that is
activated when the RAB (Reverse Auto-
matic Braking) system is in operation can
be set in 3 stages ( Max , Mid and Min ).
Sonar Audible Alarm
The RAB (Reverse Automatic Braking)
system is equipped with a function that
emits a warning sound when the system
operates. The function can be activated or
deactivated. Select On to set the warn-
ing sound to active. Select Off to set the
warning sound to inactive.
CONTINUED
3-43