4 Replacement Procedure
Removing the screws
1. Spread out the insulation sheet without detaching it from the side bezel, as shown in
Figure 4-54.
2. Remove the four screws.
CAUTION: (1) To unfasten the screws, use an insert bit of point size 0 for Philips
Screw
Screw
Figure 4-54 Replacing 14.1 Inch TMD fluorescent lamp (SXGA+) (2)
4-82
Downloaded from LpManual.com Manuals
screwdrivers.
(2) Leave the insulation sheet on the bezel to reuse.
Insulation sheet
PORTEGE S100 Maintenance Manual (960-508)
4.29 Fluorescent Lamp
Screw
Screw