Toshiba PORTEGE S100 Maintenance Manual page 268

4 Replacement Procedures
2. Turn the computer face up and remove the following screw securing the system
board.
• M2×4B
3. Lift up the system board and DC-IN jack.
4. Disconnect the DC-IN jack cable from the connector CN8800 on the system board.
DC-IN jack
M2×4B FLAT HEAD
CN8800
4-50
Downloaded from LpManual.com Manuals
FLAT HEAD screw
Figure 4-29 Removing the system board/DC-IN jack
4.21 System board/DC-IN jack
×1
PORTEGE S100 Maintenance Manual (960-508)
System board