Toshiba PORTEGE S100 Maintenance Manual page 278

4 Replacement Procedures
3. Turn up the insulator under the LCD unit and Peel off the insulator adhered to the
FL inverter. Disconnect the two cables from the both sides of the FL inverter.
4. Remove the following screw, ground wire and LCD cable holder.
• M2×3S
5. Peel the glass tape and disconnect the LCD cable from the LCD unit.
6. Remove the LCD unit from the display cover.
7. Remove the FL inverter (four points are adhered by the double-sided tapes).
8. Remove the following screw and the LCD ground plate from the LCD unit.
• M2×3S
M2×3S S-FLAT HEAD
LCD cable
Figure 4-38 Removing the FL inverter/LCD cable/LCD cable holder
4-60
Downloaded from LpManual.com Manuals
S-FLAT HEAD screw
S-FLAT HEAD screw
LCD unit
Ground wire
Glass tape
4.26 LCD unit/FL inverter
×1
×1
M2×3S S-FLAT HEAD LCD ground
LCD cable
LCD cable holder
PORTEGE S100 Maintenance Manual (960-508)
plate
Insulator
Insulator
FL inverter