Maximum Weight Of Removable Parts; Material; Environmental Conditions - Invacare Rea Dahlia 30 User Manual

Rea® Dahlia® 30 / 45
Static stability sideways
Maximum slope with parking brake
Leg to seat surface angle
Front location of armrest structure
Armrest to seat distance
Footrest to seat distance
Handrim diameter
Horizontal location of axle
Maximum turning radius
Width of the wheels
Wheel inclination

11.1.1 Maximum weight of removable parts

Legrest angle adjustable with calf pad and footrest
Armrest
Rear wheel 24" solid with handrim and spoke guard
Headrest / Neckrest / Cheek support
Trunk support
Backrest cushion
Seat cushion
Table tray

11.2 Material

Chassis, backrest tubes
Plastic parts like push handles, brake handles, foot plates and parts
of most accessories
Upholstery (seat and backrest)
Table
Seat plate
Other metal parts
Screws, washers and nuts

11.3 Environmental conditions

Temperature
Relative humidity
Atmospheric pressure
Be aware that when a wheelchair has been stored under low temperatures, it must be adjusted to operating conditions before use.
46
16"
1 3/4"
Maximum weight of removable parts
Part:
Long term / Short term storage
and transportation
10°
7°
90° — 180°
465 — 550 mm
250 — 320 mm
330 — 500 mm
445 — 535 mm
–5,7 – 94,3 mm
755 mm
20"
1 3/8"
0° (Wheelchair without load)
Steel, powder coated
Thermoplastic (e.g. PA, PE, PP, ABS and TPE) according to marking
on the parts
Foam PUR and Polyether, fabric Dartex® and plush
ABS
Coated Birch plywood
Zink alloys, aluminium alloys and steel
Steel, corrosion free
-10º C to +50º C
20% to 75%
800 hPa to 1060 hPa
22"
1 - 1 3/8" 1 - 1 3/8"
Maximum weight:
3,1 kg
2,0 kg
2,5 kg
1,4 kg
0,8 kg
2,0 kg
1,9 kg
3,9 kg
Operation
-5º C to +40º C
24"
1572307-F