5.18.1 Attaching the harness
A
1.
Loosen the handwheel and remove the neckrest.
2.
Fasten the harness holder A onto the neckrest pole.
1572307-F
B
D
C
3.
Re-tighten the handwheel.
The harness is mounted on the holder for the harness A.
Thread the straps through the harness holder A and the harness
4.
clamp B.
5.
Insert the screw C through the eyelet and into the hole in the
frame.
E
The strap mountings should be fastened from the
outside of the frame as shown above.
Tools: 5 mm Allen key
Secure with washer and nut D.
6.
The harness can also be adjusted with the straps by the
shoulders E.
Accessories
33