Fixed Legrest; Central Legrest - Invacare Rea Dahlia 30 User Manual

Passive wheelchairs
Hide thumbs Also See for Rea Dahlia 30:
Table of Contents

Advertisement

A
Pull the lever A with one hand while supporting the legrest with
1.
your other hand.
2.
When a suitable angle is obtained, let go of the lever and the
legrest will lock into one of seven preset positions B.
The distance between the lowest part of the footrest and the
ground must be at least 40 mm.
Adjusting the legrest height
Loosen screw A with an allen key.
1.
Tools: 5 mm allen key
2.
Adjust the legrest to a suitable height and the screw is caught by
one of the recesses on the legrest tube.
3.
Re-tighten the screw.
1572307-F
A

4.5.2 Fixed legrest

Adjusting the legrest height
B
A
Loosen screw A with an allen key.
1.
Don't touch the upper screw B.
2.
Adjust the legrest to a suitable height and the screw is caught by
one of the recesses on the legrest tube.
3.
Re-tighten the screw.
The distance between the lowest part of the footrest and the
ground must be at least 40 mm.

4.5.3 Central legrest

The central legrest can be adjusted in height, depth and angle.
Contact your Invacare dealer for further information.
Adjusting the angle of the central legrest
A
Loosen the adjustment knob A.
1.
2.
Hold the foot plate with the other hand.
3.
Adjust to the appropriate leg angle.
4.
Re-tighten the knob.
WARNING!
Risk of trapping fingers
When adjusting the foot plate, the fingers might get
trapped.
– Loosen the adjustment knob with one hand and hold
the foot plate with the other hand to avoid trapping
yours or anyone else's fingers.
Components
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rea dahlia 45

Table of Contents