Table of Contents
Advertisement
Maximum slope angle
brake
Oxygen cylinders
recommended
dimensions
11.2 Maximum weight of removable
parts
Maximum weight of removable parts
Part:
Leg rest angle adjustable
with calf pad and footrest
Armrest
Rear wheel 600 mm (24")
solid with handrim and
spoke guard
Headrest / Neckrest / Cheek
support
Trunk support
Backrest cushion
Seat cushion
Table tray
11.3 Tyres
The ideal pressure depends on the tyre type:
Tyre
Pneumatic profiled tyre:
515 mm (20"); 560 mm
(22"); 610 mm (24")
Pneumatic low profile tyre:
560 mm (22"); 610 mm
(24")
Schwalbe® Marathon Plus
Evolution tyre:
610 mm (24")
Solid tyre:
305 mm (12");
515 mm (20"); 560 mm
(22"); 610 mm (24")
Solid tyre:
150 mm (6"); 140 mm (5"
1/2); 125 mm (5"); 200
mm (8")
Pneumatic tyre:
200 mm (8")
1536533-F
7°
Diameter max: 111 mm
Length min/max:
198 – 645 mm
Weight min/max:
1,3 – 3,6 kg
Maximum weight:
3,2 kg
2,0 kg
2,5 kg
1,4 kg
0,8 kg
2,0 kg
1,9 kg
3,9 kg
Max. pressure
4.5 bar 450 kPa
65 psi
110 psi
7.5 bar 750 kPa
145 psi
10 bar
1000 kPa
-
-
-
-
-
-
2.5 bar 250 kPa
36 psi
The compatibility of the tyres listed above depends
on the configuration and/or model of your wheelchair.
In case of a tyre puncture consult a suitable workshop
(e.g. bike repair shop, bicycle dealer ...) to have the
tube replaced by a skilled person.
The size of the tyre is mentioned on the sidewall of
the tyre. The change of appropriate tyres must be
carried out by a qualified technician.
CAUTION!
– The tyres pressure have to be equal in both
wheels to avoid a less driving comfort, to keep
the brakes efficiency and an easy propelling of
the wheelchair.
11.4 Materials
Frame/backrest tubes
Upholstery (seat and backrest)
Push handles
Plastic parts like brake handles,
clothes guards, foot plates,
armpads and parts of most
options
Folding mechanism / vertical
brace / clamping parts / castor
forks
Screws, washers and nuts
All materials used are protected against corrosion.
We use only REACH compliant materials and
components.
Theft and metal detection systems: in seldom cases
the materials used in the wheelchair may activate
theft and metal detection systems.
11.5 Environmental conditions
Storage and
transportation
Temperature
-20 °C to 40 °C
Relative humidity
20 % to 90 % at 30 °C, not condensing
Atmospheric
pressure
Be aware that when a wheelchair has been stored
under low temperatures, it must be adjusted to
chapter 8 Maintenance, page 36 before use.
Technical Data
Aluminum, Steel
Foam PUR, Fabric Nylon
and Polyester
PVC
Thermoplastic (e.g.
PA, PP, ABS and PUR)
according to marking
on the parts
Aluminum, Steel
Steel
Operation
-5 °C to 40 °C
800 hPa to 1060 hPa
43
Advertisement
Table of Contents
