Width of the wheels
Wheel inclination
10.1.1 Maximum weight of removable parts
Legrest angle adjustable with calf pad and footrest
Armrest
Rear wheel 24" solid with handrim and spoke guard
Headrest / Neckrest / Cheek support
Trunk support
Backrest cushion
Seat cushion
Table tray
10.2 Material
Chassis, backrest tubes
Plastic parts like push handles, brake handles, foot plates
and parts of most accessories
Upholstery (seat and backrest)
Table
Seat plate
Other metal parts
Screws, washers and nuts
10.3 Environmental conditions
Temperature
Relative humidity
Atmospheric pressure
Be aware that when a wheelchair has been stored under low temperatures, it must be adjusted to operating conditions
before use.
1439960-D
16"
1 3/4"
Maximum weight of removable parts
Part:
Long term / Short term storage
and transportation
-10º C to +50º C
20"
1 3/8"
1 - 1 3/8"
0° (Wheelchair without load)
Steel, powder coated
Thermoplastic (e.g. PA, PE, PP, ABS and TPE) according to
marking on the parts
Foam PUR and Polyether, fabric Dartex® and plush
ABS
Coated Birch plywood
Zink alloys, aluminium alloys and steel
Steel, corrosion free
20% to 75%
800 hPa to 1060 hPa
22"
1 - 1 3/8"
Maximum weight:
3,1 kg
2,0 kg
2,5 kg
1,4 kg
0,8 kg
2,0 kg
1,9 kg
3,9 kg
Operation
-5º C to +40º C
Technical Data
24"
31