Invacare Rea Dahlia 30 User Manual page 15

Press the tilt handle A under the armrest pad, the seat tilts
1.
automatically.
2. To raise the backrest upwards and return to a neutral position,
press the tilt handle A. Press the forearms against the armrest
pad when raising the seat and backrest.
3. When using the user operated tilt with detachable armrests, lean
forward when returning to a neutral position.
When using the user operated tilt with detachable
armrests, more strength is needed to raise the backrest
as the armrest pole cannot be used as a help.
To return to a neutral position, move the feet a bit forward
while raising from the tilted position.
Locking the tilt and/or backrest angle adjustment
A
B
The locking device A allows you to set the tilting of the seat unit
and/or the angling of the backrest to a fixed position.
1. Tilt and/or angle the seat and backrest to the desired position.
Insert the locking device A.
2.
The position is now set and cannot be changed.
To remove the locking device, press on the plastic peg B with a small
object and pull outwards.
Electric tilt and backrest angle adjustment
WARNING!
Risk of injury
If the wheelchair is used by confused or restless users
or users with spasms:
– either lock the hand control functions
– or make sure that the hand control is out of reach for
the user.
WARNING!
Risk of injury
When tilting the wheelchair, parts of the body can be
squeezed between the armrest base and the rearwheel.
– Make sure that the distance between the armrest base
and the rearwheel is always 25 mm or more.
CAUTION!
Risk of damage to the product
– Make sure that the hand control is not unintentionally
activated.
– Do not let children play with the hand control.
– If anything unusual is observed, such as unusual sounds
or uneven running during operation, shut down the
system.
1572307-F
Risk of malfunction
– Work on the handset or other electric parts (motors
etc.) should only be carried out by properly trained
personnel.
When activating the On/Off button, a short "beep" confirms that the
hand control is activated. The hand control is active in 30 seconds
after the last action, before it is automatically deactivated.
The hand control can also be manually deactivated by
pressing the On/Off button.
The force needed to press the buttons on the hand control
is 5 Nm (finger power).
Symbols on the hand control
Battery and charging indicator
Locking function
On/Off
Backrest recline (yellow color on arrow and
backrest)
Seat tilt (green color on arrow, backrest and seat)
Up/Down (yellow color for the backrest recline,
green color for the seat tilt)
Locking of recline and tilt function
A
C
Press on the locking key A.
1.
2. Keep pressing on the locking key.
Simultaneously press on the chosen function B for the seat tilt
3.
(green) or C for the backrest angle (yellow).
4. Repeat the procedure to unlock the function.
When a function is locked, the yellow indication lamp D
shines.
Components
B
15