Calf Strap Padded; Cover For Footrest / Foot Plate; Attaching A Cover To The Single Foot Plate; Attaching A Cover To The One-Piece Footrest - Invacare Rea Dahlia 30 User Manual

1.
Remove the seat cushion A.
2.
Place the height extension plate B on the seat plate.
3.
B
Put the seat cushion A back on the height extension plate B.

5.11 Calf strap padded

1. Mount the calf strap on the legrest.
2. Wrap the end parts around the legrest tube.
3. Fixate the velcro parts.
Both legrests must be in the same angle in order to be able
to use the calf strap in the correct way.
The calf strap must not slacken to much in order to give the
proper support for the user.
1572307-F
A
A

5.12 Cover for footrest / foot plate

CAUTION!
Risk of imbalance
– The cover must be removed before the foot plate is
fixed in a raised position.

5.12.1 Attaching a cover to the single foot plate

1. Thread the foot plate cover onto the foot plate.
2. Secure the velcro® straps to fasten the cover on the foot plate.

5.12.2 Attaching a cover to the one-piece footrest

A
Detach the pre-glued velcro® straps A from the cover.
1.
A
Remove the safety paper B from the pre-glued velcro® straps A.
2.
Attach the pre-glued parts of the velcro® straps A on the front-
3.
and rear side of the footrest.
4. Place the cover C on the one piece footrest.
5. Secure the cover by attaching the velcro® parts on the cover
to the pre-glued velcro® parts on the front- and rear side of
the footrest.
Accessories
B
29