Components; Wheelchair Overview; Backrest; Adjusting The "Laguna" Tension Adjustable Backrest - Invacare Rea Dahlia 30 User Manual

4 Components

4.1 Wheelchair overview

M
L
K
J
I
G
H
A Neckrest
B

Backrest

C
Armrest
D
Seat
E
Legrest
F Castor
G Brake
H Rear wheel plate
I Anti-tip device
J Rear wheel
K
Allen key for adjustment (on the back of the backrest
cushion)
L Handle for backrest angle and seat tilt adjustment
M Push handle
The equipment of your wheelchair may differ from the
diagram as each wheelchair is manufactured individually to
the specifications in the order.
4.2 Backrest
4.2.1 Adjusting the "Laguna" tension adjustable
backrest
The "Laguna" tension adjustable backrest is only available
on the Dahlia 30º.
1572307-F
A
B
C
D
E
F
WARNING!
Risk of injury
The position of the head could cause neck and/or
breathing problems for the user if the velcro® straps
come loose at the top of the backrest.
– Make sure that the velcro® only has a minimum of 6
cm overlap distance. Press the velcro® straps firmly
together and make sure that they stay fixated.
1. Adjust the shape of the "Laguna" tension adjustable backrest with
the velcro® straps A.
WARNING!
Risk of injury
Too much slack on the velcro® when using cover Lateral
and neckrest bow/pole can cause pressure sores.
– Make sure that there is a space between the backrest
and the neckrest bow/pole in order to avoid pressure
sores.

4.2.2 Adjusting the tension adjustable backrest

1. Define where you would like to have a firmer support of the
back of the user.
2. Have the user leaning forwards and tighten the straps in that
region.
3. Make sure that all straps are fastened.
4. Apply the cover (start with the vertical middle) and make sure
that the shape now created by the tension adjustable straps is
preserved.

4.2.3 Adjusting the backrest angle

B
A
Components
A
13